Ontdek de UNI-T UT201R: een veelzijdige en betrouwbare stroomtang voor professionals. Deze True-RMS digitale multimeter is ontworpen om tot 600V (DC/AC) spanning en tot 400A (AC) stroom te meten, met een ingebouwd beschermingsmechanisme voor voltages boven 600V. De UT201R is ideaal voor elektriciens en HVAC/R-technici, met functies zoals weerstandsmeting, continuïteitstest, diode test, en NCV-detectie. Met een 4-digit, 4000 counts display en een refresh-rate van 3x per seconde, biedt het apparaat nauwkeurige metingen en een gebruiksvriendelijke ervaring. Als je de UT201R besteld, dan ontvang je uiteraard de multimeter/stroomtang en de meegeleverde accessoires voor een complete meetoplossing.

Product parameters:

- measurement of voltage, current and frequency of high voltage up to 600 V
- non-contact electric field sensing (NCV)
- multi-segment display and audible / visual alarm
- protection against voltages greater than 600V across ranges
- automatic range switching
- accuracy is guaranteed in the range of 1% to 100% of the range


Technical parameters:


1. AC current measurement (ranges / resolution / accuracy):

4,000A / 0.001A / 50Hz ~ 100Hz ± (4.0% + 10)
40.00A / 0.010A / 50Hz ~ 100Hz ± (2.0% + 10)
400.0A / 0.100A / 50Hz ~ 100Hz ± (2.0% + 10)
- frequency monitoring accuracy when measuring AC current in the range of 50 to 100Hz is ± (1.0% + 5) at 0.1Hz resolution
- overload protection at 420A


2. AC voltage measurement (range / resolution / accuracy):

4.000V / 0.001V / 10Hz ~ 10kHz ± (1.0% + 5)
40.00V / 0.010V / 10Hz ~ 10kHz ± (0.8% + 5)
400.0V / 0.100V / 10Hz ~ 10kHz ± (0.8% + 5)
600.0V / 1,000V / 10Hz ~ 10kHz ± (0.8% + 5)
- frequency monitoring accuracy when measuring AC voltage in the range of 10 to 10k ± (1.0% + 5) at a resolution of 0.01Hz to 0.01kHz
- overload protection at 600Vrms
- input impedance approx. 10MGΩ


3. DC voltage measurement (range / resolution / accuracy):


400.0mV / 0.100mV / ± (0.7% + 3)
4.000V / 0.001V / ± (0.5% + 2)
40.00V / 0.010V / ± (0.7% + 3)
400.0V / 0.100V / ± (0.7% + 3)
600V / 1,000V / ± (0.7% + 3)
- input impedance approx. 10MΩ
- overload protection at 600Vrms


4. Resistance measurement (ranges / resolution / accuracy):

400.0Ω / 0.1Ω / ± (1.0% + 2)
4,000kΩ / 0.001kΩ / ± (0.8% + 2)
40.00kΩ / 0.01kΩ / ± (0.8% + 2)
400.0kΩ / 0.1kΩ / ± (0.8% + 2)
4,000MΩ / 0.001MΩ / ± (2.0% + 5)
40.00MΩ / 0.01MΩ / ± (2.0% + 5)
- overload protection at 600 Vrms


5. Circuit continuity check:

- if the measured resistance is less than 10Ω, the signal of the continuous circuit sounds a buzzer
- if the measured resistance is greater than 31alizace, the open circuit signal does not sound a buzzer
- open circuit voltage about 2.0V
- measurement in the range of 400Ω
- overload protection at 600 Vrms


6. Measurement of diodes:

- in the forward direction, the voltage drop of the semiconductor junction is less than or equal to 2.0V
- for a silicon junction, a typical voltage drop is 0.5 to 0.8V
- open circuit voltage about 2.2V
- measurement in the range of 4,000V


7. Non-contact electric field sensing (NCV):

- allows to detect live conductors in two sensitivities -EFLo and - EFHi for low voltage distribution 110V/50/60Hz and 230V/50/60Hz.


Other parameters:

- measurement of maximum and minimum values: ano
- HOLD: ano
- low battery indication: ano
- automatic power off: ano
- battery supply 1.5 V (R03): 2pcs
- backlit display size: 37 mm x 25 mm
- product dimensions: 215 mm x 63 mm x 36 mm
- net weight of the product: 248 g
- product color: red and gray


Package contents:

- clamp multimeter UT201R: 1pc
- test leads: 1 pair
- battery 1.5 V (R03): 2pcs
- instructions for use: 1pc